University of Malta
 

News
UOM Main Page
 
 
 
Newspoint
Campus Map button

EX-MMIM

News

News

News

Activities

Equipment

Training

Meeting

Results Dissemination


News

Seminar [PDF]

 

Activities

  • October 2012: EX-MMIM project formally kicks off. Recruitment of Research Support Officer.
  • November 2012: Kick-off meeting between the consortium members and launch of the EX-MMIM project web-site.
  • January 2013 – October 2015: Regular internal meetings between the research team members and meeting between all the consortium members were held.
  • January – March 2013: Survey in the local industry aimed at investigating the status of micro injection moulding and challenges faced to produce micro parts.
  • April 2013: Launch of the on-line forum on injection moulding.
  • July – September 2013: Machine installation and commissioning. A training session on injection moulding process and the machine key features was organized at the DIME lab.
  • July 2013: A snippet on the THINK magazine - issue 6, published by the University of Malta. On page 21 of this magazine it is mentioned how research in the EX-MMIM project contributes to the manufacturing of micro components which can be utilized in biomedical devices.
  • July 2013: A snippet on the project in the DIME annual newsletter.
  • May – October 2013:  Design and optimisation of case study distal end.
  • November 2013: Submission of first stage detailed project report to MCST.
  • November 2013: Article on survey results in the Malta Chamber of Engineers Magazine.
  • December 2013: Christmas get-together between research team and industrial partners.
  • November 2013 – April 2014: Design of injection mould.
  • May – November 2014: Fabrication and modifications of the injection mould.
  • November 2013 – April 2014: Design of injection mould.
  • February – April 2014: Simulations for mould filling analysis, weld line formation etc.
  • June 2014: MCST approved a one year extension to the EX-MMIM project.
  • June 2014: Injection mould tested for the first time on the dr BOY micro injection machine at the DIME lab. Some modifications to the mould were required.
  • July 2014: A snippet on the project in the DIME annual newsletter.
  • August 2014: Dr Farrugia presented a research paper  at the ASME 2014 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2014), in Buffalo, USA.
  • September 2014 – January 2015: Generation of e-learning material.
  • October 2014: Recruitment of new Research Support Officer.
  • September - December 2014: Minor modifications to the mould and moulding trials at Playmobil Malta Ltd. First moulding of the distal end produced.
  • December 2014: Christmas get-together between research team and industrial partners.
  • January 2015: Further testing of mould on the dr BOY micro injection machine at the DIME lab.
  • February 2015: e-learning course was live.
  • October 2015: Seminar on multi-material micro injection moulding.
  • February – September 2015: Further mould modification to eliminate weld line formation on optical component. Carrying out design of experiments to establish optimum process parameters.
  • October 2015: A half-day seminar was organised.
  • November 2015:  End of project scientific, management and financial reports were concluded and submitted to MCST.
  • December – to date: Filing process of a community registered design on the optical component designed and fabricated as part of the EX-MMIM project.

Equipment

The two component (2K) micro injection moulding machine was purchased from Dr. Boy GmbH & CO.KG of Germany. The machine consists of:

  • a horizontal micro injection moulding machine (BOY22E)
  • a separate injection unit required for the configuration of the 2K moulding (BOY XS-2K).

The mould fabrication begins as blocks of chromium steel, namely 1.2312 steel, a high durability metal that can withstand repeated high injection pressure of plastic and clamping forces. A milling process was then used for machining the mould plates and other mould components. After a vacuum hardening heat treatment was applied to the core and cavity plate inserts, the EDM was adopted for the fabrication of core insert and cavities features. Initially, the CAD models for each electrode were developed. The electrodes have features opposite to those required by the mould cavity features. The machining of the electrodes was done using a 5-axes Computer numerically Controlled (CNC) machine. Two electrodes were produced for each core and cavity feature i.e. an electrode for roughening and the other electrode for finishing. A number of common mould components were purchased off the shelf. These comprise the rack and pinion mechanism to operate the index plate, guide pins, shoulder bolts, hydraulic cylinders (one for the operation of the index plate mechanism and the other for the operation of the ejectors), proximity sensors and quick release fittings for the cooling channels. Once all the mould components were manufactured or bought, the assembly process commenced. This is the most challenging phase of the mould fabrication since it must be ensured that all components fit precisely together. The assembly process was done in two phases. First, the fixed side of the mould was assembled i.e. the cavity plate and the feed plate assembly. The second phase focused on the construction of the core plate assembly. Mould design and fabrication was carried out in collaboration with Tek-Moulds Precision Engineering Ltd. The technical expertise from the other industrial partners and from the research team at UOM was very useful to optimise the mould design such that defects on the micro parts could be eliminated. 

Back to top

Training

A number of meetings were organized in order to familiarize university technical to issues related to the installation of machine services such as gantry systems, water chilling system to control the temperature of the machine hydraulics and to operation of injection moulding machines. Members of the technical staff of the Department of Industrial and Manufacturing Engineering (DIME) paid visits at one of the industrial partners, Techniplast Ltd., in order to receive brief informal training on mechanical and electrical aspects of injection moulding tools and machine.

A formal training session was provided to the DIME technical staff by the machine supplier representatives in Malta.  This covered basics of injection moulding, process parameters and an overview of the machine main functions.

In addition, members of the DIME academic and technical staff, at UOM were given training on the 2K micro injection moulding machine, by highly skilled technical staff at Playmobil Malta Ltd. The micro injection mould tool was used as a case study to set up the exact timeframes of the different steps of the injection moulding cycle (e.g. the sequence of injecting the material of the optical component followed by the injection of the housing material). This exercise was also useful in order to test the core pull dual function of the machine. 

Back to top

Meeting

Various internal and consortium meetings have been organised during the two stages of the project in order to ensure that tasks and deliverables are timely executed and submitted. The outline of these consortium meetings typically consisted of an introductory message followed by a series of discussions regarding issues that required to be tackled.

Back to top

Results Dissemination

Dr Farrugia presented a paper entitled ‘Design of an endoscopic micro optical part for fabrication with micro shot injection moulding’ at the ASME 2014 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2014), August 17-20, 2014, Buffalo, USA, co-authored by Ing. L Said, Dr A. Rochman and Ing. P Vella.

A half-day seminar on multi-material micro injection moulding was held on the Thursday 22 October 2015 at MCST premises in Kalkara. The seminar was addressed by a number of speakers, who treated various aspects related to high-value added manufacturing, micro fabrication and the EX-MMIM project in general

Dr Pullicino Orlando, Executive Chairman of MCST formally opened the seminar. This was followed by an address by the Parliamentary Secretariat for Research, Innovation, Youth and Sport, Hon. Chris Agius. Hon. Chris Cardona, Minister for the Economy, Investment and Small Business, delivered a speech on high-value added manufacturing in Malta. Dr Ing. Philip Farrugia, Project Principal Investigator and Senior Lecturer at DIME, gave an overview of the EX-MMIM project. The key project experts, Dr Ing Vella and Dr Rochman, lecturers at DIME, spoke respectively about micro and nano manufacturing processes and micro injection moulding. Mr Chris Camilleri, Research Support Officer presented the research results generated in this project. Mr Kevin Busuttil, managing director of Tek-Moulds Precision Eng. ltd spoke about the lessons learnt by industry as a result of participating in funded research projects. Ing. Andreas Striegel, researcher at the Karlsruhe Institute of Technology in Germany, delivered a presentation on applied research in micro and nano replication.  After the presentations two working groups discussed the benefits of amplifying micro manufacturing in Malta and the challenged faced by industry concerning micro injection moulding. Prof. Jonathan Borg, Professor at DIME moderated the discussion. The seminar was well attended by people from academia and industry.

Dissemination of project results locally including articles in the Malta Chamber of Professional Engineers and the Times of Malta. 

A service on the seminar has been aired by the newsroom of ONE and TVM on the day of the seminar. An article on the event was published on tvm.com.mt and on-line newspapers including the Times of Malta and the Malta Independent. In addition, following the seminar, a number of actions were taken to promote its outcomes, including the issue of a press release by MCST, a snippet on the NEWSPOINT section of the University of Malta website and posting in the Facebook page of the Industrial & Manufacturing Engineering.

Back to top

 


Calendar
Notices
 
 
Last Updated: 10 June 2016

Log In back to UoM Homepage