Issue Date | Title | Author(s) |
2024 | SOI MEMS Electro-thermal actuators for biomedical applications : operation in 0.9% NaCl solution | Sciberras, Thomas; Grech, Ivan; Demicoli, Marija; Mallia, Bertram; Sammut, Nicholas; Mollicone, Pierluigi |
2024 | Hip joint replacement based on linear cylindrical articulations for reduced wear : a radical change in design | Fanton, Leonardo; Schembri Wismayer, Pierre; Dalli, Donald; Mollicone, Pierluigi; Mallia, Bertram; Bartolo, Maria Kristina; Buhagiar, Joseph P. |
2023-05 | MEMS electrothermal actuators for underwater manipulation and mechanical characterisation of human red blood cells | Sciberras, Thomas; Mollicone, Pierluigi; Demicoli, Marija; Grech, Ivan; Sammut, Nicholas; Mallia, Bertram |
2023 | Polyethylene wear simulation models applied to a prosthetic hip joint based on unidirectional articulations | Dalli, Donald; Fanton, Leonardo; Mallia, Bertram; Schembri Wismayer, Pierre; Buhagiar, Joseph P.; Mollicone, Pierluigi |
2023 | Thermo-mechanical fluid–structure interaction numerical modelling and experimental validation of MEMS electrothermal actuators for aqueous biomedical applications | Sciberras, Thomas; Demicoli, Marija; Grech, Ivan; Mallia, Bertram; Mollicone, Pierluigi; Sammut, Nicholas |
2022 | A tribocorrosion appraisal of a dual layer PVD coated CoCrMo alloy tribopair | Mazzonello, Antonino; Buhagiar, Joseph P.; Chetcuti, Raisa; Dearnley, Peter A.; Valsesia, Andrea; Colpo, Pascal; Mallia, Bertram |
2022 | Ultra-porous titanium nitride as a dual-action supercapacitor for implantable neural interfacing electrodes | Arpa, Jeanelle; Rechendorff, Kristian; Schembri Wismayer, Pierre; Mallia, Bertram |
2022 | Coupled finite element-finite volume multi-physics analysis of MEMS electrothermal actuators | Sciberras, Thomas; Demicoli, Marija; Grech, Ivan; Mallia, Bertram; Mollicone, Pierluigi; Sammut, Nicholas |
2022 | Experimental and numerical analysis of MEMS electrothermal actuators with cascaded V-shaped mechanisms | Sciberras, Thomas; Mollicone, Pierluigi; Demicoli, Marija; Grech, Ivan; Sammut, Nicholas; Mallia, Bertram |
2020 | Tribocorrosion response of duplex layered CoCrMoC/CrN and CrN/CoCrMoC coatings on implant grade 316LVM stainless steel | Chetcuti, Raisa; Dearnley, Peter A.; Mazzonello, Antonino; Buhagiar, Joseph P.; Mallia, Bertram |
2019 | The effect of alloying elements on the properties of pressed and non-pressed biodegradable Fe–Mn–Ag powder metallurgy alloys | Caligari Conti, Malcolm; Mallia, Bertram; Sinagra, Emmanuel; Schembri-Wismayer, Pierre; Buhagiar, Joseph P.; Vella, Daniel A. |
2019 | Essential design and fabrication considerations for the reliable performance of an electrothermal MEMS microgripper | Demicoli, Marija; Grech, Ivan; Mallia, Bertram; Mollicone, Pierluigi; Portelli, Barnaby; Sammut, Nicholas |
2019 | The effects of cold arm width and metal deposition on the performance of a U-Beam electrothermal MEMS microgripper for biomedical applications | Demicoli, Marija; Grech, Ivan; Mallia, Bertram; Mollicone, Pierluigi; Sammut, Nicholas |
2018 | Improved Tribocorrosion resistance of a CoCrMo implant material by carburising | Cassar, Josianne; Mallia, Bertram; Mazzonello, Antonino; Karl, Andreas; Buhagiar, Joseph P. |
2018 | The effects of structure thickness, air gap thickness and silicon type on the performance of a horizontal electrothermal MEMS microgripper | Demicoli, Marija; Grech, Ivan; Mallia, Bertram; Mollicone, Pierluigi; Sammut, Nicholas |
2018 | Design and fabrication considerations, numerical modelling, and testing of a MEMS Microgripper | Demicoli, Marija; Mollicone, Pierluigi; Mallia, Bertram; Grech, Ivan; Portelli, Barnaby; Sammut, Nicholas |
2018 | Analytical, numerical and experimental study of a horizontal electrothermal MEMS microgripper for the deformability characterisation of human red blood cells | Demicoli, Marija; Grech, Ivan; Mallia, Bertram; Mollicone, Pierluigi; Sammut, Nicholas |
2017 | The effect of sliding onto the metal-electrolyte interface : studying model parameter modifications by means of EIS | Cassar, Josianne; Mallia, Bertram; Karl, Andreas; Buhagiar, Joseph P. |
2017 | Response of duplex Cr(N)/S and Cr(C)/S coatings on 316L stainless steel to tribocorrosion in 0.89% NaCl solution under plastic contact conditions | Sun, Y.; Dearnley, Peter A.; Mallia, Bertram |
2016 | EIS of carburised CoCrMo : evolution of parameters characterising the metal-electrolyte interface | Cassar, Josianne; Mallia, Bertram; Karl, Andreas; Buhagiar, Joseph P. |
2016 | Low temperature carburised austenitic stainless steel for metal-on-metal tribological contact | Maniscalco, Shaun; Caligari Conti, Malcolm; Cassar, Josianne; Grima, Christian; Karl, Andreas; Schembri Wismayer, Pierre; Mallia, Bertram; Buhagiar, Joseph P. |
2016 | Design and analysis of a MEMS-based electrothermal microgripper | Demicoli, Marija; Mollicone, Pierluigi; Grech, Ivan; Mallia, Bertram; Sammut, Nicholas |
2014 | Optimising sulfuric acid hard coat anodising for an Al–Mg–Si wrought aluminium alloy | Bartolo, N.; Sinagra, Emmanuel; Mallia, Bertram |
2014 | Porosity and root dentine to material interface assessment of calcium silicate-based root-end filling materials | Camilleri, Josette; Grech, L.; Galea, K.; Keir, D.; Fenech, Maurizio; Formosa, L.; Damidot, D.; Mallia, Bertram |
2014 | Push-out bond strength of MTA with antiwashout gel or resins | Formosa, L. M.; Mallia, Bertram; Camilleri, Josette |
2013 | S-phase against S-phase tribopairs for biomedical applications | Buhagiar, Joseph P.; Jung, A.; Gouriou, Damien; Mallia, Bertram; Dong, Hanshan |
2013 | Exploring new W–B coating materials for the aqueous corrosion–wear protection of austenitic stainless steel | Mallia, Bertram; Dearnley, Peter A. |
2013 | Investigation of the physical properties of tricalcium silicate cement-based root-end filling materials | Grech, L.; Mallia, Bertram; Camilleri, Josette |
2013 | Characterization of set intermediate restorative material, biodentine, bioaggregate and a prototype calcium silicate cement for use as root-end filling materials | Grech, L.; Mallia, Bertram; Camilleri, Josette |
2013 | A quantitative method for determining the antiwashout characteristics of cement-based dental materials including mineral trioxide aggregate | Formosa, L. M.; Mallia, Bertram; Camilleri, Josette |
2013 | Character and chemical-wear response of high alloy austenitic stainless steel (Ortron 90) surface engineered with magnetron sputtered Cr–B–N ternary alloy coatings | Mallia, Bertram; Stüber, Michael; Dearnley, Peter A. |
2013 | Mineral trioxide aggregate with anti-washout gel – properties and microstructure | Formosa, L.M.; Mallia, Bertram; Camilleri, Josette |
2013 | The chemical properties of light- and chemical-curing composites with mineral trioxide aggregate filler | Formosa, L.M.; Mallia, Bertram; Camilleri, Josette |
2013 | The chemical wear (corrosion-wear) of novel Cr based hard coated 316L austenitic stainless steels in aqueous saline solution | Dearnley, Peter A.; Mallia, Bertram |
2012 | The microstructure and surface morphology of radiopaque tricalcium silicate cement exposed to different curing conditions | Formosa, L.M.; Mallia, Bertram; Bull, T.; Camilleri, Josette |
2012 | Post-deposition heat treatment of co-deposited Cr3C2 and AISI 410 stainless steel using the coaxial laser deposition technique | Fenech, Maurizio; Mallia, Bertram; Grech, Maurice; Betts, John Charles |
2012 | The effect of curing conditions on the physical properties of tricalcium silicate cement for use as a dental biomaterial | Formosa, L. M.; Mallia, Bertram; Camilleri, Josette |
2011 | Hydration characteristics of zirconium oxide replaced Portland cement for use as a root-end filling material | Camilleri, Josette; Cutajar, A.; Mallia, Bertram |
2011 | Evaluation of the dimensional changes of mineral trioxide aggregate sealer | Camilleri, Josette; Mallia, Bertram |
2011 | Replacement of radiopacifier in mineral trioxide aggregate ; characterization and determination of physical properties | Cutajar, A.; Mallia, Bertram; Abela, S.; Camilleri, Josette |
2007 | The structure and properties of magnetron sputtered Fe-Cr-Ni coatings containing sigma phase | Mallia, Bertram; Dahm, Karl L.; Ogwu, Abraham; Dearnley, Peter A. |
2007 | The corrosion–wear response of Cr–Ti coatings | Mallia, Bertram; Dearnley, Peter A. |