| Issue Date | Title | Author(s) |
| 2015 | 3D printing lab equipment | Gambin, Gerald (2015) |
| 2022 | Additive production management in COVID-19 pandemic | Zmuda Trzebiatowski, Piotr; Królikowski, Tomasz; Strulak-Wójcikiewicz, Roma; Nikończuk, Piotr; Błażejewski, Andrzej |
| 2023 | Additively manufactured 316L stainless steel subjected to a duplex peening-PVD coating treatment | Bonnici, Luana; Buhagiar, Joseph P.; Cassar, Glenn; Vella, Kelsey Ann; Chen, Jian; Zhang, Xiyu; Huang, Zhiquan; Zammit, Ann |
| 2024-04 | Combining 3D printing and injection moulding for the fabrication of polymer micro-components with internal hollow features | Farrugia, Jeremy; Vella, Pierre; Rochman, Arif |
| 2019-06 | Defect formation in EBM parts built at different orientation | Camilleri, Christian; Rochman, Arif |
| 2021 | Design and characterisation of microfluidic channels fabricated using additive manufacturing techniques | Baldacchino, Gianluca (2021) |
| 2014-12 | Design and manufacture of injection mold inserts using electron beam melting | Rochman, Arif; Borg, Althea Kate |
| 2017-10 | Development and fabrication of patient-specific knee implant using additive manufacturing techniques | Zammit, Robert; Rochman, Arif |
| 2023 | The effect of a duplex surface treatment on the corrosion and tribocorrosion characteristics of additively manufactured Ti-6Al-4V | Vella, Kelsey Ann; Buhagiar, Joseph P.; Cassar, Glenn; Pizzuto, Martina Marie; Bonnici, Luana; Chen, Jian; Zhang, Xiyu; Huang, Zhiquan; Zammit, Ann |
| 2023 | Factors affecting interface bonding in multi-material additive manufacturing | Delia, Sarah (2023) |
| 2021 | Filament development for laser assisted FDM 3D printing | Borg, Gabriel (2021) |
| 2021-10 | Filament development for laser assisted FFF 3D printing | Borg, Gabriel; Kiss, Szabolcs; Rochman, Arif |
| 2022-07 | From theory to practice : development and calibration of micro pellet extruder for additive manufacturing | Curmi, Albert; Rochman, Arif |
| 2023 | Fused filament fabrication and injection moulding of plastic packaging : an environmental and financial comparative assessment | Bezzina, Cheryl Marie; Refalo, Paul |
| 2021 | Gridshell structure joint optimisation through the use of three-dimensional printing technology | Micallef, Adam (2021) |
| 2020 | In-situ synthesised interlayer enhances bonding strength in additively manufactured multi-material hybrid tooling | Tan, Chaolin; Zhang, Xinyue; Dong, Dongdong; Attard, Bonnie; Wang, Di; Kuang, Min; Ma, Wenyou; Zhou, Kesong |
| 2023 | Investigating children’s experiences for smart wearables : implications on design for additive manufacturing | Bonello, Matthew; Farrugia, Philip; Buhagiar, Nathalie |
| 2022 | Microstructural characterisation and high-temperature oxidation of laser powder bed fusion processed Inconel 625 | Lewis, Emily Rose; Taylor, Mary P.; Cruchley, Nick; Attard, Bonnie; Morrison, A. P. C.; Attallah, Moataz M.; Cruchley, Sam S. |
| 2020 | Microstructural control during laser powder fusion to create graded microstructure Ni-superalloy components | Attard, Bonnie; Cruchley, Sam; Beetz, Christian; Megahed, Mohammad; Attallah, Moataz M.; Chiu, Yu Lung |
| 2021 | New materials developments | Attard, Bonnie; A. Mohamed, Abd El-Moez; Attallah, Moataz M. |
| 2021 | On the constitutive relationship between solidification cells and the fatigue behaviour of IN718 fabricated by laser powder bed fusion | Piglione, Alessandro; Attard, Bonnie; Rielli, Vitor Vieira; Maldonado, Claudia-Tatiana Santos; Attallah, Moataz M.; Primig, Sophie; Pham, Minh-Son |
| 2019-07 | Rapid prototyping solution for the production of vulcanized rubber components | Vassallo, Matthew; Rochman, Arif |
| 2023-04 | Rapid tooling development for low volume injection molding of cosmetic compacts | Vella, Andrea; Rochman, Arif; Vella, Pierre |
| 2018 | Selective laser melting of high-performance pure tungsten : parameter design, densification behavior and mechanical properties | Tan, Chaolin; Zhou, Kesong; Ma, Wenyou; Attard, Bonnie; Zhang, Panpan; Kuang, Tongchun |
| 2022 | Skeleton shells : developing a standard component to simplify the construction process of concrete shells | Abela, Jack Daniel (2022) |
| 2020 | Small-lot production with additive production using reverse logistics and IT solutions in COVID-19 era | Krolikowski, Tomasz; Strulak-Wojcikiewicz, Roma; Nikonczuk, Piotr; Zmuda-Trzebiatowski, Piotr; Deja, Agnieszka |
| 2017 | Start-up : thinking in 3D | Stanfield, Sam |
| 2021 | Structural optimization of space frame connections fabricated through additive manufacturing | Farrugia, Luke (2021) |
| 2024 | Towards sustainable injection moulding using 3D printed conformal cooling channels : a comparative simulation study | Clark, Rebecca; Rochman, Arif; Refalo, Paul; Farrugia, Philip; Vella, Pierre |
