<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:dc="http://purl.org/dc/elements/1.1/" version="2.0">
  <channel>
    <title>OAR@UM Collection:</title>
    <link>https://www.um.edu.mt/library/oar/handle/123456789/129100</link>
    <description />
    <pubDate>Tue, 17 Nov 2026 08:59:55 GMT</pubDate>
    <dc:date>2026-11-17T08:59:55Z</dc:date>
    <item>
      <title>Preliminary design of a high speed hydrofoil boat</title>
      <link>https://www.um.edu.mt/library/oar/handle/123456789/150999</link>
      <description>Title: Preliminary design of a high speed hydrofoil boat
Abstract: The preliminary design of a naval vessel is comparable to a juggling act due to the &#xD;
necessity of the Naval Architect to ensure compliance with client’s wishes, safety &#xD;
requirements as well as ensuring the actual feasibility of the chosen design. The juggling &#xD;
act gets more interesting when the vessel to be designed is a hydrofoiling vessel due to &#xD;
the intended use of the vessel including the hull being lifted in its entirety out of the &#xD;
water. &#xD;
The design of the high-speed hydrofoil vessel was initiated by carrying out a market &#xD;
analysis to ensure any current trends are accounted for resulting in soft additional upper &#xD;
and lower limits which will act like guidelines for the initial geometrical values, &#xD;
including a waterline length of 10 m a beam of 2.5 m and a draught of 0.5 m with a target &#xD;
velocity of 55 Kn. &#xD;
The preliminary design of a high-speed hydrofoiling vessel follows the standard design &#xD;
spiral with extra additions to account for the hydrofoiling components. The design spiral &#xD;
indicates an iterative approach in which the vessel design would be systematically &#xD;
improved and finalised until all the required criteria are met. &#xD;
The subsequent stage after the geometric specification was the sizing of the hydrofoils &#xD;
based of the mass displacement of the hull and following this the structural analysis of &#xD;
the vessel, ensuring a good compromise of strength and weight savings. &#xD;
The determination of the structure allowed for the subsequent strut and hydraulic sizing &#xD;
in which the vital link between the foils and the hull are numerically validated and the &#xD;
strut extension control through the hydraulics were appropriately sized. The resistance &#xD;
was numerically and computationally determined using the Lahtiharju method allowing &#xD;
for the further efficiency determination of the expectable hull drag.  &#xD;
The drag of the hydrofoils is calculated to determine the final engine sizing accounting &#xD;
for transmission efficiency. The establishment of the engine and fuel allows for the &#xD;
stability analysis of the vessel to be carried out to ensure vessel compliance with the &#xD;
relevant codes. The stability analysis allows for the modelling of the final design and &#xD;
finalisation of the design of the passenger cabin. The completion of the Line Plans and &#xD;
3D models indication the completion of the preliminary design.
Description: B.Eng. (Hons)(Melit.)</description>
      <pubDate>Wed, 01 Jan 2025 00:00:00 GMT</pubDate>
      <guid isPermaLink="false">https://www.um.edu.mt/library/oar/handle/123456789/150999</guid>
      <dc:date>2025-01-01T00:00:00Z</dc:date>
    </item>
    <item>
      <title>Analysis of 3D-printed honeycomb cores</title>
      <link>https://www.um.edu.mt/library/oar/handle/123456789/150994</link>
      <description>Title: Analysis of 3D-printed honeycomb cores
Abstract: The mechanical properties of 3D-printed honeycomb cores were investigated, with the &#xD;
intent to develop a valid finite element model to simulate the response of 3D-printed &#xD;
honeycomb cores under mechanical loading. The study focused on 3D-printed &#xD;
honeycomb cores with PLA filament. It employed experimental testing, finite element &#xD;
analysis, and theoretical modelling to evaluate and compare the in-plane and out-of&#xD;
plane properties of honeycomb cores. &#xD;
A review of Cellular Solids was conducted to establish the framework for this research. &#xD;
The experimental work involved tensile and compressive tests using ASTM standards &#xD;
to obtain the mechanical properties of 3D-printed PLA, followed by in-plane and out&#xD;
of-plane testing on honeycomb cores adhering to ASTM standards. Finite element &#xD;
analysis was then used to replicate the responses of the honeycomb cores experiments. &#xD;
The experimental results confirmed the transverse-isotropic properties of 3D-printed &#xD;
plastic, where a brittle response was observed during tensile loads and a plastic response &#xD;
was observed during compressive loads. &#xD;
The honeycomb experimental results provided similar values to the theoretical models, &#xD;
with a 23% deviation between the two approaches, concluding that the theoretical model &#xD;
offers a reliable prediction for 3D-printed honeycomb cores. &#xD;
The numerical analysis results provided mixed values. From analysing solely the unit &#xD;
cell, creating boundary conditions to replicate the periodic nature of the honeycomb &#xD;
structure proved to be a challenge, resulting in inaccurate results. &#xD;
The research created a foundation of experimental and numerical analysis to further &#xD;
understand the properties of 3D-printed honeycomb, allowing for additional research to &#xD;
be performed on various cell geometries.
Description: B.Eng. (Hons)(Melit.)</description>
      <pubDate>Wed, 01 Jan 2025 00:00:00 GMT</pubDate>
      <guid isPermaLink="false">https://www.um.edu.mt/library/oar/handle/123456789/150994</guid>
      <dc:date>2025-01-01T00:00:00Z</dc:date>
    </item>
    <item>
      <title>Investigation of a multi-temporal discretisation approach for ice formation on aerofoils</title>
      <link>https://www.um.edu.mt/library/oar/handle/123456789/150993</link>
      <description>Title: Investigation of a multi-temporal discretisation approach for ice formation on aerofoils
Abstract: Aircraft icing is a serious issue that can jeopardise flight safety. When ice accumulates &#xD;
on an aircraft's wings, and other surface components, it alters the aerodynamic properties &#xD;
by reducing lift and increasing drag. This problem is particularly prevalent in cold &#xD;
weather conditions, where supercooled water droplets in clouds freeze upon contact with &#xD;
the aircraft. Therefore, by understanding how ice affects aircraft surfaces, engineers can &#xD;
design better de-icing and anti-icing systems which reduce the risk of accidents. &#xD;
This study explored the aerodynamic effects of ice accretion on aerofoils when they are &#xD;
exposed to icing conditions. This was done by employing numerical simulations &#xD;
validated against experimental data from NASA's Icing Research Tunnel (IR T). The &#xD;
project aimed to analyse ice formation geometry, aerodynamic performance &#xD;
degradation, and the validity of Computational Fluid Dynamics (CFD) models in &#xD;
predicting the aerodynamic characteristics of iced aerofoils. More specifically, this &#xD;
project focused on rime ice formation since it was the least challenging type of ice to &#xD;
mimic computationally. Apart from the case which was validated, ice accretion was also &#xD;
modelled for a case when an aerofoil flows through thinner air at higher altitudes of &#xD;
approximately 4,000 metres. This was done to simulate a subsonic aircraft flying at &#xD;
those altitudes. &#xD;
The findings revealed that the current numerical simulations overestimate the ice profile &#xD;
dimensions and fail to accurately capture the aerodynamic degradation, with significant &#xD;
discrepancies observed in stall angle predictions. To combat this, the multi-temporal &#xD;
discretisation approach was introduced to manipulate the ice profile around the aerofoil &#xD;
and subsequently try to replicate the stall characteristics. This method was partially &#xD;
successful, as it more accurately captured the stall conditions. However, it did not fully &#xD;
replicate the aerodynamic performance degradation of an iced aerofoil. &#xD;
Consequently, this study concluded that while current numerical approaches provide &#xD;
insight into icing phenomena, they struggle to replicate realistic aerodynamic &#xD;
degradation accurately. These results highlight the need for improved simulation &#xD;
methodologies to enhance the reliability of CFD models for icing research and aircraft &#xD;
safety.
Description: B.Eng. (Hons)(Melit.)</description>
      <pubDate>Thu, 01 Jan 2026 00:00:00 GMT</pubDate>
      <guid isPermaLink="false">https://www.um.edu.mt/library/oar/handle/123456789/150993</guid>
      <dc:date>2026-01-01T00:00:00Z</dc:date>
    </item>
    <item>
      <title>Logistics simulation of a fabrication facility</title>
      <link>https://www.um.edu.mt/library/oar/handle/123456789/150599</link>
      <description>Title: Logistics simulation of a fabrication facility
Abstract: This project aims to improve the logistics processes of Domestica Ltd., a company in Malta that produces custom furniture. The DMAIC methodology is utilised to improve operational efficiency. The project examines two main stages: manufacturing operations in the fabrication facility and installation tasks performed at client locations. Time studies, simulation modelling, and stakeholder interviews provided detailed analysis of both stages to identify inefficiencies while reducing non-value-adding activities and enhancing workflow consistency. During production operations analysis, critical inefficiencies, unnecessary travel, and material storage issues emerged. The improvements aimed at standardising machine setting sheets, reorganising material storage, making workspace adjustments, and suggesting the installation of a gang rip saw to improve batching efficiency. Implementing these changes received validation through discrete event simulations in AnyLogic, which showed a 10–12% average time reduction across all door types. Layout adjustments were considered but eventually dismissed because the existing facility was already optimised, and significant structural modifications proved unnecessary. The process of installing doors outside the facility during the project's second phase was studied. The study identified site adjustment delays during architrave fitting, wasted time from unorganised toolkits, and excessive work being done on-site instead of at the facility. The thesis highlights the necessity of an ongoing improvement approach based on Kaizen principles instead of isolated interventions. The findings recommend developing an organisational culture that continuously empowers employees to identify and resolve inefficiencies instead of viewing the DMAIC cycle as a single event. According to this research study, structured analysis, practical interventions, and a lean oriented mindset improved the productivity and scalability of manufacturing and installation operations for a SME such as Domestica.
Description: B.Eng. (Hons)(Melit.)</description>
      <pubDate>Wed, 01 Jan 2025 00:00:00 GMT</pubDate>
      <guid isPermaLink="false">https://www.um.edu.mt/library/oar/handle/123456789/150599</guid>
      <dc:date>2025-01-01T00:00:00Z</dc:date>
    </item>
  </channel>
</rss>

