Please use this identifier to cite or link to this item:
https://www.um.edu.mt/library/oar/handle/123456789/92459
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Zammit, Ann | - |
dc.date.accessioned | 2022-03-28T06:32:25Z | - |
dc.date.available | 2022-03-28T06:32:25Z | - |
dc.date.issued | 2018 | - |
dc.identifier.citation | Zammit, A. (2018). Shot peening of austempered ductile iron. In M. A. Chowdhury (Ed.), Advanced surface engineering research (pp. 25-44). IntechOpen. | en_GB |
dc.identifier.isbn | 9781789843408 | - |
dc.identifier.uri | https://www.intechopen.com/chapters/62411 | - |
dc.identifier.uri | https://www.um.edu.mt/library/oar/handle/123456789/92459 | - |
dc.description.abstract | Austempered ductile iron (ADI) is a type of heat-treated cast iron, which offers numerous positive advantages including: good combination of mechanical properties and damping characteristics, lower density than steel and the possibility of casting components into near-net shape. However, surface engineering techniques are necessary to extend the use and prolong the lifetime of ADI engineering components. One such treatment for improving the bending fatigue strength of ADI is shot peening. This treatment creates compressive residual stresses and high dislocation densities at the surface of the treated components. However, the shot peening process is not always beneficial in improving the tribological characteristics of ADI. Its behaviour depends on the type of wear mechanism, applied loads, lubrication, heat treatment process parameters and the resulting surface finish of the components. This chapter will look into the effect of shot peening on ADI in more detail and will delve into a case study, which was carried out to analyse the bending fatigue resistance and tribological characteristics of Cu-Ni-alloyed ADI. | en_GB |
dc.language.iso | en | en_GB |
dc.publisher | IntechOpen | en_GB |
dc.rights | info:eu-repo/semantics/openAccess | en_GB |
dc.subject | Ductile iron -- Fatigue -- Testing -- Case studies | en_GB |
dc.subject | Ductile iron -- Surfaces -- Testing | en_GB |
dc.subject | Surfaces (Technology) | en_GB |
dc.subject | Mechanical wear -- Testing | en_GB |
dc.subject | Shot peening | en_GB |
dc.title | Shot peening of austempered ductile iron | en_GB |
dc.title.alternative | Advanced surface engineering research | en_GB |
dc.type | bookPart | en_GB |
dc.rights.holder | The copyright of this work belongs to the author(s)/publisher. The rights of this work are as defined by the appropriate Copyright Legislation or as modified by any successive legislation. Users may access this work and can make use of the information contained in accordance with the Copyright Legislation provided that the author must be properly acknowledged. Further distribution or reproduction in any format is prohibited without the prior permission of the copyright holder. | en_GB |
dc.description.reviewed | peer-reviewed | en_GB |
dc.identifier.doi | 10.5772/intechopen.75772 | - |
Appears in Collections: | Scholarly Works - FacEngMME |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Shot_peening_of_austempered_ductile_iron_2018.pdf | 7.77 MB | Adobe PDF | View/Open |
Items in OAR@UM are protected by copyright, with all rights reserved, unless otherwise indicated.