1. OAR@UM
  2. Faculty of Engineering
  3. Department of Electrical Engineering
  4. Scholarly Works - FacEngEE
Please use this identifier to cite or link to this item: https://www.um.edu.mt/library/oar/handle/123456789/88054
Full metadata record
DC FieldValueLanguage
dc.contributor.authorZammit, Daniel-
dc.contributor.authorSpiteri Staines, Cyril-
dc.contributor.authorApap, Maurice-
dc.contributor.authorMicallef, Alexander-
dc.date.accessioned2022-02-01T12:23:16Z-
dc.date.available2022-02-01T12:23:16Z-
dc.date.issued2019-
dc.identifier.citationZammit, D., Spiteri Staines, C., Apap, M., & Micallef, A. (2019). Alternative droop control method using a modified lag compensator for paralleled converters in DC microgrids. 6th International Conference on Control, Decision and Information Technologies (CoDIT), Paris. 156-164.en_GB
dc.identifier.urihttps://www.um.edu.mt/library/oar/handle/123456789/88054-
dc.description.abstractDroop control is used to obtain load sharing between paralleled converters within a standalone/islanded DC microgrid. There are two main types of droop control methods used in DC microgrids; the impedance (V-I) droop and the admittance (I-V) droop. This paper presents an alternative droop control system built on the I-V droop method. The proposed alternative droop control system uses a modified Lag compensator to obtain voltage control, as well as load sharing between the paralleled converters within the DC microgrid. The control system consists of two nested controllers, an inner Proportional-Integral (PI) controller to control the current, and an outer modified Lag compensator to control the voltage and the droop. The proposed control system was modelled in Simulink, and the operation was tested by simulating two paralleled buck converters operated in the continuous current mode while sharing a common resistive load.en_GB
dc.language.isoenen_GB
dc.publisherInstitute of Electrical and Electronics Engineersen_GB
dc.rightsinfo:eu-repo/semantics/restrictedAccessen_GB
dc.subjectMicrogrids (Smart power grids)en_GB
dc.subjectElectric inductorsen_GB
dc.subjectPID controllersen_GB
dc.subjectMicrogrids (Smart power grids)en_GB
dc.titleAlternative droop control method using a modified lag compensator for paralleled converters in DC microgridsen_GB
dc.typeconferenceObjecten_GB
dc.rights.holderThe copyright of this work belongs to the author(s)/publisher. The rights of this work are as defined by the appropriate Copyright Legislation or as modified by any successive legislation. Users may access this work and can make use of the information contained in accordance with the Copyright Legislation provided that the author must be properly acknowledged. Further distribution or reproduction in any format is prohibited without the prior permission of the copyright holder.en_GB
dc.bibliographicCitation.conferencename6th International Conference on Control, Decision and Information Technologies (CoDIT)en_GB
dc.bibliographicCitation.conferenceplaceParis, France, 23-26/04/2019en_GB
dc.description.reviewedpeer-revieweden_GB
dc.identifier.doi10.1109/CoDIT.2019.8820617-
Appears in Collections:Scholarly Works - FacEngEE

Files in This Item:
File Description SizeFormat 
Alternative_droop_control_method_using_a_modified_lag_compensator_for_paralleled_converters_in_DC_microgrids_2019.pdf
  Restricted Access		1.3 MBAdobe PDFView/Open Request a copy
Show simple item record Statistics


Items in OAR@UM are protected by copyright, with all rights reserved, unless otherwise indicated.