Please use this identifier to cite or link to this item:
https://www.um.edu.mt/library/oar/handle/123456789/150517| Title: | Design and prototyping of a modular upper-body exoskeleton for human-centred industrial operations |
| Authors: | Gilson, Steven (2026) |
| Keywords: | Musculoskeletal system -- Diseases Robotic exoskeletons Prototypes, Engineering Manufacturing processes |
| Issue Date: | 2026 |
| Citation: | Gilson, S. (2026). Design and prototyping of a modular upper-body exoskeleton for human-centred industrial operations (Bachelor's dissertation). |
| Abstract: | Work-related musculoskeletal disorders account for 72% of all work-related ill health in European manufacturing and cost UK industry an estimated £22.9 billion annually. Existing commercial exoskeletons either offer limited passive assistance at low cost or full active capability at prices exceeding €8,000, leaving most small and medium enterprises without a viable option. This dissertation addresses that gap through the design and prototyping of a modular hybrid upper-body exoskeleton targeting workers performing repetitive elevated-arm tasks such as pipe insertion and overhead assembly. The design followed the Roozenburg and Eekels Basic Design Cycle, progressing from a structured end-user survey and Product Design Specification through four synthesis stages to a fully evaluated detailed design. A hybrid architecture combining passive spring gravity-compensation with a CubeMars AK70-10 quasi-direct drive motor for powered elbow assistance was selected from four conceptual alternatives. Biomechanical analysis established a governing cable tension of 1,233.8 N, and material selection using Ashby's methodology identified Al 6061-T6 for all primary load-bearing components, confirmed by FEA which demonstrated a 41% reduction in forearm deformation. The final design accommodates users from the 5th to 95th anthropometric percentile, integrates a full sensor suite, and includes an audio-visual cognitive assistance module. At a recommended unit price of €3,047, it sits at the accessible end of the commercial market while delivering active hybrid functionality. A full-scale PLA prototype was tested across four phases. Passive subsystem testing confirmed effective gravity compensation with no range-of-motion restriction exceeding 10%, and electronic testing validated the full motor drive chain via CAN bus in MIT mode. Cognitive aid testing showed audio-guided participants completed a fault-finding task 68% faster with fewer errors. Two structural defects identified during testing, both caused by incorrect FDM print orientation, were resolved through targeted redesign. The results confirm that the project objectives have been substantially met at prototype scale. |
| Description: | B.Eng. (Hons)(Melit.) |
| URI: | https://www.um.edu.mt/library/oar/handle/123456789/150517 |
| Appears in Collections: | Dissertations - FacEng - 2026 |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| 2608ENRENR420005080002_1.PDF Restricted Access | 4.15 MB | Adobe PDF | View/Open Request a copy |
Items in OAR@UM are protected by copyright, with all rights reserved, unless otherwise indicated.
