Please use this identifier to cite or link to this item:
https://www.um.edu.mt/library/oar/handle/123456789/150519| Title: | Digital light processing based fabrication of biomimetic micro-moulded polymer inserts for antifouling applications |
| Authors: | Busuttil, Noel (2026) |
| Keywords: | Fouling Polypropylene Photopolymers Microfabrication -- Malta Engineering -- Malta |
| Issue Date: | 2026 |
| Citation: | Busuttil, N. (2026). Digital light processing based fabrication of biomimetic micro-moulded polymer inserts for antifouling applications (Bachelor's dissertation). |
| Abstract: | Surface fouling is a major challenge in biomedical and engineering applications, where biological contaminants can reduce efficiency, hygiene, and overall performance. Bioinspired shark-skin micro-riblet structures have emerged as a promising passive antifouling solution. However, accurately replicating these microscale riblets remains challenging. This study assessed the feasibility of fabricating two biomimetic test artefacts, TA1 and TA2, with different riblet geometries. TA1 featured larger riblets than TA2. The artefacts were produced using a process chain combining Digital Light Processing (DLP)-based rapid tooling (RT) with micro-injection moulding (μIM), followed by a series of characterisation methods and experiments. Material characterisation showed that post-curing significantly affects the performance of IM-HDT resin. Notably, a twenty-minute cure at 230°C was shown to provide the ideal balance among thermal and mechanical properties, and structural integrity, whereas longer curing led to degradation. Digital Light Processing (DLP) experimental validation showed that optical over-curing and feature aspect ratio strongly influence dimensional accuracy, thus requiring compensation strategies to achieve the design target dimensions. The μIM process successfully replicated the inserts in polypropylene (PP), producing consistent micro-riblet structures with high precision. Wettability and surface free energy analyses showed that the replicated riblets modified liquid-surface interactions, indicating improved antifouling behaviour. The TA2-inspired design exhibited the most stable hydrophobicity and lowest surface energy, suggesting that smaller riblet geometries provide better antifouling performance. Overall, the research demonstrated that combining DLP-based RT with μIM is a feasible approach for producing functional biomimetic shark-skin micro-riblet structures. Nonetheless, well-defined materials, process parameters, and microscale design are essential to achieve accurate riblet geometries. |
| Description: | B.Eng. (Hons)(Melit.) |
| URI: | https://www.um.edu.mt/library/oar/handle/123456789/150519 |
| Appears in Collections: | Dissertations - FacEng - 2026 |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| 2608ENRENR420005070952_1.PDF Restricted Access | 4.86 MB | Adobe PDF | View/Open Request a copy |
Items in OAR@UM are protected by copyright, with all rights reserved, unless otherwise indicated.
