Please use this identifier to cite or link to this item: https://www.um.edu.mt/library/oar/handle/123456789/150993
Title: Investigation of a multi-temporal discretisation approach for ice formation on aerofoils
Authors: Hili, Christopher Alexander (2025)
Keywords: Airplanes -- Ice prevention
Aerofoils
Aerodynamics
Computational fluid dynamics
Stalling (Aerodynamics)
Issue Date: 2026
Citation: Hili, C. A. (2025). Investigation of a multi-temporal discretisation approach for ice formation on aerofoils (Bachelor's dissertation).
Abstract: Aircraft icing is a serious issue that can jeopardise flight safety. When ice accumulates on an aircraft's wings, and other surface components, it alters the aerodynamic properties by reducing lift and increasing drag. This problem is particularly prevalent in cold weather conditions, where supercooled water droplets in clouds freeze upon contact with the aircraft. Therefore, by understanding how ice affects aircraft surfaces, engineers can design better de-icing and anti-icing systems which reduce the risk of accidents. This study explored the aerodynamic effects of ice accretion on aerofoils when they are exposed to icing conditions. This was done by employing numerical simulations validated against experimental data from NASA's Icing Research Tunnel (IR T). The project aimed to analyse ice formation geometry, aerodynamic performance degradation, and the validity of Computational Fluid Dynamics (CFD) models in predicting the aerodynamic characteristics of iced aerofoils. More specifically, this project focused on rime ice formation since it was the least challenging type of ice to mimic computationally. Apart from the case which was validated, ice accretion was also modelled for a case when an aerofoil flows through thinner air at higher altitudes of approximately 4,000 metres. This was done to simulate a subsonic aircraft flying at those altitudes. The findings revealed that the current numerical simulations overestimate the ice profile dimensions and fail to accurately capture the aerodynamic degradation, with significant discrepancies observed in stall angle predictions. To combat this, the multi-temporal discretisation approach was introduced to manipulate the ice profile around the aerofoil and subsequently try to replicate the stall characteristics. This method was partially successful, as it more accurately captured the stall conditions. However, it did not fully replicate the aerodynamic performance degradation of an iced aerofoil. Consequently, this study concluded that while current numerical approaches provide insight into icing phenomena, they struggle to replicate realistic aerodynamic degradation accurately. These results highlight the need for improved simulation methodologies to enhance the reliability of CFD models for icing research and aircraft safety.
Description: B.Eng. (Hons)(Melit.)
URI: https://www.um.edu.mt/library/oar/handle/123456789/150993
Appears in Collections:Dissertations - FacEng - 2025

Files in This Item:
File Description SizeFormat 
2508ENRENR420000015779_1.PDF
  Restricted Access
69.38 MBAdobe PDFView/Open Request a copy


Items in OAR@UM are protected by copyright, with all rights reserved, unless otherwise indicated.