Please use this identifier to cite or link to this item: https://www.um.edu.mt/library/oar/handle/123456789/150994
Title: Analysis of 3D-printed honeycomb cores
Authors: Xerri, Josef (2025)
Keywords: Honeycomb structures
Additive manufacturing
Polylactic acid
Finite element method
Materials -- Testing
Numerical analysis
Strength of materials
Issue Date: 2025
Citation: Xerri, J. (2025). Analysis of 3D-printed honeycomb cores (Bachelor's dissertation).
Abstract: The mechanical properties of 3D-printed honeycomb cores were investigated, with the intent to develop a valid finite element model to simulate the response of 3D-printed honeycomb cores under mechanical loading. The study focused on 3D-printed honeycomb cores with PLA filament. It employed experimental testing, finite element analysis, and theoretical modelling to evaluate and compare the in-plane and out-of plane properties of honeycomb cores. A review of Cellular Solids was conducted to establish the framework for this research. The experimental work involved tensile and compressive tests using ASTM standards to obtain the mechanical properties of 3D-printed PLA, followed by in-plane and out of-plane testing on honeycomb cores adhering to ASTM standards. Finite element analysis was then used to replicate the responses of the honeycomb cores experiments. The experimental results confirmed the transverse-isotropic properties of 3D-printed plastic, where a brittle response was observed during tensile loads and a plastic response was observed during compressive loads. The honeycomb experimental results provided similar values to the theoretical models, with a 23% deviation between the two approaches, concluding that the theoretical model offers a reliable prediction for 3D-printed honeycomb cores. The numerical analysis results provided mixed values. From analysing solely the unit cell, creating boundary conditions to replicate the periodic nature of the honeycomb structure proved to be a challenge, resulting in inaccurate results. The research created a foundation of experimental and numerical analysis to further understand the properties of 3D-printed honeycomb, allowing for additional research to be performed on various cell geometries.
Description: B.Eng. (Hons)(Melit.)
URI: https://www.um.edu.mt/library/oar/handle/123456789/150994
Appears in Collections:Dissertations - FacEng - 2025

Files in This Item:
File Description SizeFormat 
2508ENRENR420005076020_1.PDF
  Restricted Access
6.45 MBAdobe PDFView/Open Request a copy


Items in OAR@UM are protected by copyright, with all rights reserved, unless otherwise indicated.