PocketQube Pico-Satellite attitude control : implementation and testing

Abstract

Attitude control for CubeSats and small satellites has been widely researched. Nonetheless, most of the literature is based on simulations, with limited availability of actual implementation results. This article tries to fill this gap by highlighting implementation difficulties and proposing appropriate workable solutions. The difficulty of direct reaction wheel (RW) torque feedback for attitude control of a 1p PocketQube (PQ) pico-satellite is noted and addressed. A simple control strategy implementable on a microcontroller is then proposed, showing how direct RW torque control can be achieved through angular velocity measurement without using derivative feedback. A linear quadratic Gaussian controller with integral action in quaternion formulation is used for attitude control, and a reference input boundary caused by the use of the standard integral action scheme is highlighted. A simple solution is then proposed, showing how using the error quaternion removes this boundary. An extended Kalman filter in quaternion formulation is used for attitude determination by fusing data from three sensors, namely, a magnetometer, solar cells, and a gyroscope. An accelerometer is used in place of the solar cells for simplified laboratory testing. Magnetometer error due to surrounding interference is addressed through calibration. A string-suspended model of the UoMBSat-1 PocketQube pico-satellite is used for attitude control testing. Preliminary single-axis tests are performed using a PID controller to determine the satellite parameters and actuators verification. The proposed linear quadratic Gaussian controller is then tested and validated experimentally in the laboratory setting.