Tanti K., Rochman A., Refalo P., Analysing the Sustainability of Cascade Recycling in Plastic Manufacturing, in Int. Conference on Resource Sustainability, Dublin, Ireland, 19-23 July 2021
Vassallo C., Rochman A., Refalo P., The impact of polymer selection and recycling on the sustainability of injection moulded parts, in 27th CIRP Conference on Life Cycle Engineering (LCE 2020), Grenoble, France, 13-15 May 2020
Vassallo M., Rochman A., Rapid Prototyping solution for the Production of Vulcanized Rubber Components, in the 22nd Int. Conference on Material Forming (ESAFORM), Mondragon Unibertsitatea, Spain, 8-10 May 2019
Rochman A., Bezzina M., Vella P., De Meo A., Pantani R., Effect of Surface Roughness on Properties of Micro Injection Molded Parts, 8th International Conference on Polymers and Moulds Innovations (PMI), Guimarães, Portugal, 19-21 September 2018
Meekers I., Refalo P., Rochman A., Analysis of Process Parameters affecting Energy Consumption in Plastic Injection Moulding, in 25th CIRP Conference on Life Cycle Engineering (LCE 2018), Copenhagen, Denmark, 25 April-2 May 2018
Vella P., Farrugia P., Rochman A., Camilleri C., Design Optimisation of an Optical Component Used in an Endoscopic Micro Distal End Fabricated with Two-Shot Injection Moulding, in 9th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT 2018), Cape Town, South Africa, 10-13 February 2018
Rochman A. and Zahra K., Development and Performance Analysis of Static Mixing Nozzle for Injection Molding of Thermoset Elastomers, Polymer Engineering and Science, vol. 58(4), 2017, pp. 521-527
Tranter J. B., Refalo P., Rochman A, Towards Sustainable Injection Molding of ABS Plastic Products, Journal of Manufacturing Processes, Volume 29 (2017), pp 399-406
Bruno J., Rochman A., Cassar G., Effect of Build Orientation of Electron Beam Melting on Microstructure and Mechanical Properties of Ti-6Al-4V, Journal of Materials Engineering and Performance, Volume 26 (2017), Issue 2, pp.692-703
Zammit R., Rochman A., Development and Fabrication of Patient-Specific Knee Implant Using Additive Manufacturing Techniques, in 20th International Conference of the European Scientific Association for Material Forming (ESAFORM), Dublin, Ireland, 26-28 April, 2017
Rochman A, Zahra K., Development and Performance Analysis of Static Mixing Nozzle for Injection Molding of Thermoset Elastomers, 7th Bi-Annual International Conference on Polymers and Moulds Innovations (PMI), Ghent, Belgium, September 21-23, 2016
Rochman A., Zahra K., Influence of Melt Mixer on Injection Molding of Thermoset Elastomers, 19th ESAFORM Conference, Nantes, France, 27-29 April, 2016
Rochman A., Borg A.K., Rapid Manufacturing of Corrosion Resistant Tools Using Electron Beam Melting, 6th Int. Conference on Polymers and Moulds Innovations, Guimarães, Portugal, 10-12 September, 2014
L. Said, P. Farrugia, A. Rochman, P. Vella, Design of an endoscopic micro optical part for fabrication with micro shot injection moulding, IDETC/CIE Conference, Buffalo, USA, August 17-20, 2014
Borg A.K., Rochman A., Design, Manufacture and Testing of Titanium EBM Insert for Injection Molding, International Conference on Advanced Research in Virtual and Rapid Prototyping (VRAP), Leiria, Portugal, 1-5 October, 2013
Rochman A., Spiteri C., Hybrid Manufacturing: Combining Additive and Subtractive Processes, in 16th International Conference of the European Scientific Association for Material Forming (ESAFORM), Aveiro, Portugal, 22-24 April, 2013
Rochman, A., Camilleri, M., Frick, A., Vella P., Influence of Mould Surface Roughness on Morphological Structure and Mechanical Properties of Micro Injection Moulded Part, Polymers and Moulds Innovations (PMI), Ghent, Belgium, 12-14 September, 2012
Rochman A., Borg A.K., Design and Manufacture of Injection Mold Inserts Using Electron Beam Melting, Journal of Manufacturing Science and Engineering, in Special Issue: Additive Manufacturing (AM) and 3 D Printing, December 2014, Vol. 136, p. 061011
Rochman A., Frick A., Martin P., “Polymer Molding Process at Post Crystallization Temperature Region“, in 27th International Conference of the Polymer Processing Society (PPS), Marrakesh, Morocco, 10-14 May, 2011
Frick A., Rochman A, Martin P., "Semi Solid Molding Process of High Viscosity Thermoplastic Polymers", in 14th International Conference of the European Scientific Association for Material Forming (ESAFORM), Queen's University Belfast, UK, 27-29 April, 2011
Minev R., Vella P., Brousseau E, Dimov S. , Scholz S. , Matthews C., "Capability Maturity Study of the Horizontal and Vertical Integration of Structuring, Patterning and Characterization MNTs”, 4M 2010 Conference, France, November 2010
Minev R., Vella P., Brousseau E, Dimov S. , Minev E. , Matthews C. “Methodology for Capability Maturity Assessment of MNT Chains”, 4M 2010 Conference, France, November 2010
Rochman A., Magro M., "Design Approach to Feasibility Study of Thermoforming Added Molding Process", Polymer and Mould Innovations (PMI) Conference, Ghent, Belgium, 15-17 September 2010
Vella P.C., Brousseau E.B., Minev R., Dimov S.S. “A Methodology for Technology Maturity Assessment of Micro and Nano Manufacturing Processes and Process Chains”, 5th International Conference on MicroManufacturing (ICOMM 2010), USA, April 2010
Kautt M., Abad E., Minev R., Brousseau E., Vella P., Azcarate S., Anson S.M., Dimov S.S. “Developing a distributed toolbox for advanced multimaterial micro and nano processing in Europe” SSI 2010 (SMART SYSTEMS INTEGRATION 2010) Conference, Italy, March 2010
Farrugia P.J., Vella P. and Mifsud M. (2010) “A Framework Supporting Life-Cycle Guidance For Fabricating Micro Components By Compression Moulding”, Proceedings of the ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE 2010), Montreal, Quebec, Canada
Rochman A., Frick A., Martin P., “Miniaturisation and Reliability Study of the New Developed Thermo Flow Forming (TFF)“, Europe/Africa Regional Meeting of Polymer Processing Society (PPS), Larnaca, Cyprus, 18-21 October 2009
Rochman A., Frick A., Martin P., “A Novel Manufacturing Technology for Polymeric thin-walled Micro Components“, in 24th International Conference of Polymer Processing Society (PPS), Salerno, Italy, June 2008
Vella P., Borg J.C., Grech A.K., Spiteri D., (2007), "Design for Micromilling Guidelines", in Proceedings of the 16th International Conference on Engineering Design, ICED '07, Paris, France